![Cut To Length Lines CLL Cut To Length Line HYBRID Used [#3301]](Cut%20To%20Length%20Line%202000%20x%205Obrazky190-main.jpg "Cut To Length Lines CLL Cut To Length Line HYBRID Used [#3301] Cut To Length Lines CLL")
SOLD
1
Used Cut To Length Line
2000mm x 5mm
HYBRID
This used, completely re-manufactured stop/start cut to length line has been sold to an Eastern Europe customer.
1. PROCESS MATERIAL
Hot/cold rolled, Rm=380 N/mm2
Coil width: 1.000 - 2.000 mm
Coil ID: 508mm to 720mm
Max. coil weight: 16 t
Maximum material thickness: 5.0mm
Minimum material thickness: 1.5mm
2. LINE DESCRIPTION
Max. line speed: 12m / min
Total installed power: 126 kW – 250 A
Voltage: 400 V – 50 Hz
Air pressure: 6 bar
Length tolerance: less than +/- 1mm at L = 2000mm
Double mandrel decoiler with hydraulic coil lift
Hydraulic expansion of mandrels
Snubber rolls, idle
Mandrel rotation by two separate AC motors, for:
- unwinding
- braking during line operation
- rewinding* (* a few meters)
Coil opening station
consisting of:
- peeler table with deflector roll
- motorized pinch rolls, hydraulic, with PU-coated rolls
Leveller
Manufacturer: Mariani (Italy)
No. of work rolls: 15
Diameter of work rolls: 68.5mm / roll width: 2200mm
No. of back-up up rolls: 153 / diameter: 120mm
Tilting (entry/exit) by electric motor
Screw-down movement by 2 separate electric motors
Main motor: AC, 55 kW
Lubrication system: by oil pump for the gearbox, centralized grease pump for the work rolls
Measuring wheel at exit of the leveller, with encoder
(Movable by air cylinder, with back-up roll)
Cutoff shear
Manufacturer: Salvetti (Italy)
Mechanic power type with air clutch
Blades gap adjustement manual, by micrometric screws
Electric cabinet and operator switchboard, to CE
Hydraulic power pack
With centrifugal-pump variable flow for silent operation
Electrovalves on each machine connected by flexible pipes
Fittings with nipples
Pneumatic connections by Rilsan pipes
We offer Start/Stop, Roll Feeder, Flying Shear, Rotary Shear Cut To Length Lines
both new and used / re-manufactured for: Aluminium, Coated, Cold Rolled, Copper, Galvanized, Hot Rolled,
Prepaint, Silicon, Stainless, Tinplate,Titanium
.
Your enquiries welcome for also individual Line Parts like: Decoilers, Feeders,
Levellers, Sheet Stackers, Straighteners ...