1
New Non-Stop Cut To Length Line
1250mm x 1.8mm Stainless Steel
FLOREANI & PARTNERS
FOR SALE
OFFERED SUBJECT TO BEING UNSOLD
- with 11-roll (& back-ups) straightener
Material thickness range :
.3mm to 1.8mm
Coil width min./max.: 200mm / 1250mm
Coil weight: max. 10 Ton
Coil ID: 450mm to 550mm
Coil OD max.: 1600mm
Sheet Stacker:
minimum sheet size 200mm x 500mm
maximum sheet size 1250mm x 4000mm
Line max. speed: 65m / minute
LINE DESCRIPTION
10 Ton COIL CAR
Hydraulic, requiring floor pit
with suitable rewinding cover to hold the weight of one person
Traverse stroke, motor driven: ca. 4000mm
Up/down stroke: ca. 500mm
Translation speed: 10m / minute
UNCOILER
With allsteel frame, overhung 4-segment mandrel drum hydraulically expanded
Hydraulic snubber arm with rubber coated roll
Mobile base with AUTO. COIL EDGE CONTROL
The rotation of mandrel is by AC motor with automatic pull-control, adjustable on PC
MATERIAL-SUPPORTING, HYDRAULIC TELESCOPIC TABLE
PRECISION STRAIGHTENER
6-HI Type, with 11 Work Rolls and Back-Ups and 2 Pinch Rolls
All work rolls hardened and chromium-plated
D.C. motor drive machine with motion transmission to rolls by universal joints
The adjustment of roll-penetration is from the main switchboard, with positioning display
An automatic drive will open rolls in case the machine stops
The machine upper frame opens by rotation, to allow easier cleaning of rolls
An idle roll at exit, adjustable in height, allows ‘final’ adjustment to get good material flatness
The 2 enty rolls, with diameter: 128mm
The 11 working rolls, with diameter: 48mm
The 13 hold-rolls, with diameter: 45mm
The idle roll, with diameter: 120mm
TWO CONNECTION TABLES
and rolls, between Straightener and Shear
Hydraulically operated; going down into loop pit during line operation
SHEAR
with:
- PINCH ROLLS
- ENCODER
Mechanical power type, static, synchronized with the feed-rolls
4 cutting edge knives, adjustable
SHEET STACKING & RUN-OUT CONVEYORS SYSTEM
With adjustable-capacity air fan and air duct conveyors; pneumatic system to cut the air-blow, synchronized with the coil-“tail” detection
Two-section conveyor, to get a progressively-increasing output speed and keep distance between two sheets
The elevating table’s surface comes with transmission-chain pallet holders, & sensor controlled up/down motion. A floor pit is required
Second receiving table, static, placed next to first table
Capacity of tables: 2 Ton each table; max. sheet stack height 700mm, including pallet
2nd-pallet holder next to stacker
CONTROL BOARD
The line supervision-program runs on a PC, connected to office by an intelligent interface
The program allows to plan the line production: set speeds, accelerations, decelerations, inertias, timer cycles, etc….
Memory and diagnostic are provided for errors and anomalies
We offer Start/Stop, Roll Feeder, Flying Shear, Rotary Shear Cut To Length Lines
both new and used / re-manufactured for: Aluminium, Coated, Cold Rolled, Copper, Galvanized, Hot Rolled,
Prepaint, Silicon, Stainless, Tinplate,Titanium
.
Your enquiries welcome for also individual Line Parts like: Decoilers, Feeders,
Levellers, Sheet Stackers, Straighteners ...