1
VIDEOS
New Mini Slitting Lines
1250mm x 1.0mm | B-Class
FLOREANI & PARTNERS
PRESENTING: OUR MINI SLITTING LINES, 1000mm OR 1250mm WIDE, FOR ALU. COPPER STEEL TITAN-ZINC ETC. ... SUITABLE FOR RAINWATER DOWNPIPE AND GUTTER MAKERS, ROOFERS, TRADERS OF BUILDING MATERIALS & THE LIKE
1250mm x .5 - 1.0mm
25m / min
Motorized Decoiler & Car option up to max. 5 t cap.
/ or, alt.: simple, low cost Frame Decoiler
#3194
#3230
Adjustable entry guide by handwheel
Three idle rollers
- top roll 60mm dia. / bottom rolls 50mm dia.
Two rubber covered pinch rolls
- diameter: 110mm motorised
Pneumatic cylinders with manual control to lift pinch rolls
Slitter Head
- shaft diameter: 100mm (with circular knife O.D.: 150mm)
- quick clamp circular knives in special steel
- metric rule for positioning of knives, and handwheel to lift them
- max. 'standard' number of slits: 4
Guillotine, rigid construction, hydraulic
- power pack motor: HP 2.0
Feed speed adjustable from 0 to 25 meters per minute, controlled by touch screen
Numerical control SIPRO SIAX 80.
Interface with touch screen control panel
Enter up to 20 different lengths
Cutting accuracy + / - 1mm over 3 meters
Electrical control panel rotates
to control the machine from all positions
Drive motor: HP 3.00 / 380 Volts 50 Hz
Option: protective film dispenser
Hardened steel separators
"Felt" type strip tension pad with up-down motion operated by air cylinders; 'manual' valve and air-pressure adjustment
Recoiler with max. 1 t cap.
( Mod.: 'AAS' / 1250mmx1000kg )
- radiused drum segments to allow optimal adherence to coil-inside
- hand operated clamp along the full drum length, for the coil leading edge
- drum expansion range: 470mm to 500mm
- air operated overarm with separators
- dancing arm connected to a potentiometer, for automatic recoiling with "stop" when the wanted length has been produced of slit coils
Drive motor: HP 3.00 / 380 Volts 50 Hz
The lines comply with CE regulations
We offer quality Slitting Lines both new and used / re-manufactured for Aluminium, Coated, Cold Rolled, Copper, Galvanized, Hot Rolled, Prepaint, Silicon, Stainless, Tinplate,
Your enquiries welcome for also individual Line Parts like: Decoilers, Recoilers,
Slitters, Strip Tension Stands, Turnstiles, Upenders ...